corrugatedmetalgasket

Corrugated Metal Gasket-Cixi Sinston Sealing Material Factory- http://www.sinston.com

CONSTRUCTION:

 

SINSTON 6300 Corrugated Metal Gasket consist of a metal core with concentric grooves on both sides, coated with expanded graphite or PTFE layer. The thickness of metal can be thinner, e.g. 3mm, 2mm, 1mm, 0.5mm, compared with 6400 Kammprofile gasket, and the corrugation pitch is 3mm, 4mm or 6mm depending on the width of the sealing face.

6300 can be classified into flat, serrated and corrugated type. The gasket constructions with small than OD 1000mm is usually made in on piece. Welding is also recommended for cost –effective.

 

APPLICATION & PROPERTIES:

 

6300 CMG have been proven to be both reliable and cost-effective for flange and heat exchange application, especially used in low-pressure applications in large diameter flue gas ducts at high temperature, also suitable for uneven or distorted sealing surfaces. It eliminates the problem of difficult handing with large non-metal gaskets used in those applications.

 

ADVANTAGES :

                                                                   

◆Outstanding mechanical strength and thermal conductivity

◆Capable of withstanding high temperature

◆There are almost no limitations regarding size

◆Choice of insert metals easier

◆Trouble-free for handling and installation even for large size

 

MATERIAL :

 

Other special metal is also available on request.

 

Materials for the insert:

 

                   Flexible Graphite, PTFE, Non-asb, etc                               

Normal with thickness 0.5mm, 1mm, 1.5mm

 

 

ORDER EXAMPLE:

 

6300 CMG

900×940×4.5mm (ID×OD×Thick)  with 1 rib (width 20mm)  

Material: SS316+Graphite

Thickness of metal: 3mm

 

 

 

 RETURN 

GASKETS  GLAND PACKING GASKET SHEET RAW MATERIALS HEAT INSULATION  TOOL & MACHINES CONTACT US